marklin-users.net community | Forum

 
Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
CV Registers in Delta decoder?
Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Previous Topic Next Topic
Offline Bias  
#1 Posted : 12 April 2007 12:47:35(UTC)
Retweet
Bias


Joined: 12/04/2007(UTC)
Posts: 3
Location: Tyringe,
Hello Forum,
This is my first written lines in this forum. I have read and learned a lot and are very grateful for all the knowledge collected here.

My first question here is quite simple (but maybe not the answer):
Are there any editable CV registers in the Delta decoders? (6603x)

If yes, is the usage of them the same as for the Digital decoders?
Is it possible to return to factory settings?

The reason for my question is that I forgot to lift my Delta loco off the track when I changed some CV values in another digital loco, and now the Delta loco behaves strange. (It runs very jerky and often needs a push to get ahead.) These locos of course had different adresses, but anyway, maybe some changes had affected the Delta loco.

The lesson I have learned have resulted in a separated programming track in my layout, and serious plans to upgrade the Delta decoder to a Digital decoder.

Every comment is appreciated!

BR's / Tobias
Back to top

Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook  
Back to top  
Offline nevw  
#2 Posted : 12 April 2007 13:47:05(UTC)
Retweet
nevw

Australia   
Joined: 27/08/2005(UTC)
Posts: 11,071
Location: Murrumba Downs QLD
Cannot help you but welcome to the Forum
NOt wearing the Pink Pinny, which is hard to see and now I have a white Pinny which also is hard to see against MY pure white Skin Still have 2 new shiny tin Hips that is badly in Need of Repair matching rusting tin shoulders
and a hose pipe on the aorta
Junior member of the Banana Club, a reformist and an old Goat with a Bad memory, loafing around
Back to top
Offline hemau  
#3 Posted : 12 April 2007 13:47:52(UTC)
Retweet
hemau


Joined: 09/01/2007(UTC)
Posts: 589
Location: The Netherlands
Hello Tobias,
Welcome to the forum!
I don't believe you can edit any CV in a Delta decoder. My delta-decoders only have dipswitches.
Probably I have done the same as you did: it is very well possible that a Delta loco was on the track when I programmed the one programmable loco I have; I have never experienced the Delta's being affected (however now I am also using a separate programming track just for safety).

Does your Delta run well on analog power (with the proper setting of the dipswitches)? Your problems sound more like a bad contact (dirty wheels, puko's etc.)

Henk
C and M track; CS1R and 2 MS
Back to top
Offline stephenbb  
#4 Posted : 12 April 2007 20:25:46(UTC)
Retweet
stephenbb


Joined: 22/11/2004(UTC)
Posts: 1,836
Location: Trumbull, CT
Welcome to the forum!delta only have dip-switches.
Stephen(USA)
ETE,NMRA,MEA
Back to top
Offline steventrain  
#5 Posted : 12 April 2007 21:21:15(UTC)
Retweet
steventrain

United Kingdom   
Joined: 21/10/2004(UTC)
Posts: 31,758
Location: United Kingdom
Welcome to the forum,Tobias.
Large Marklinist 3- Rails Layout with CS2/MS2/Boosters/C-track/favorites Electric class E03/BR103, E18/E118, E94, Crocodiles/Steam BR01, BR03, BR05, BR23, BR44, BR50, Big Boy.
Back to top
Offline Troy Yang  
#6 Posted : 12 April 2007 22:24:43(UTC)
Retweet
Troy Yang

United States   
Joined: 10/12/2003(UTC)
Posts: 356
Location: San Francisco, California USA
There is no way to program the delta chip. It was intended to be a low-end cheap chip. Sorry.



Marklin HO - all eras and everything.
Back to top
Offline Weltenbummler  
#7 Posted : 12 April 2007 23:06:56(UTC)
Retweet
Weltenbummler

Germany   
Joined: 14/09/2006(UTC)
Posts: 459
Location: Berlin (D)
Hi Tobias,

I've done the same like you for a lot of times. But I never came across this problem.
To my knowledge the delta decoders do not have any cv's which can be changed as they were just brouhght into the market to present a "cheap" digital system and let the analogue fans get locos cheaper than to buy full digital locos.
Regard from Karachi
Thomas
Back to top
WWW BLOG
Offline Bias  
#8 Posted : 13 April 2007 10:44:53(UTC)
Retweet
Bias


Joined: 12/04/2007(UTC)
Posts: 3
Location: Tyringe,
Thanks for all your comments.
It never was my intention to edit any registers in the Delta loco.
I just wondered if they existed and could have been changed by mistake.

After reading here in the forum I have done some service actions, cleaned the brushes and the track. Now it works fine!

BR's / Tobias
Back to top
Users browsing this topic
Guest
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2025, Yet Another Forum.NET
This page was generated in 0.581 seconds.