 Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
Total rookie question, so please bear with me! I have a Trix 21523 starter pack which, up until a few days ago, was working perfectly but now is totally kaput. Using a digital multimeter I've tracked back from loco to mains, and it seems that the problem lies with the Marklin 66201 power supply, which is apparently offering no current to the speed controller. Can anyone suggest a replacement unit that has a UK three pin plug? I appreciate that I need a 230v input/18v output unit but I'm not clear on whether amp rating is an issue - and I'm not all that keen on simply taking a punt and frying my entire setup. All suggestions gratefully received.
|
|
|
|
|
|
 Joined: 04/02/2011(UTC) Posts: 3,586 Location: Paris, France
|
Hi Andy
The best replacement is a Märklin 66363 (18 VDC, 2A, UK wartplug)
If you insist on not using a non Märklin PSU, (not recommended) you need a 18 VDC(Regulated), 2 Amps but watch for the proper Jack plug and polarity
Cheers
Jean
PS: are you sure the Märklin PSU is dead? I have used MANY of them over decades and found that the usit, itself is almost indestructible but the connection to the electronis (Gleisbox in your case) may have a broken wire. Worst come to worst, cut the wire just before the jack plug and test if there is power. |
|
|
|
|
|
|
Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
That's really useful advice - many thanks, Jean.
I was also a little surprised that the power pack has given up the ghost but nevertheless it's the only bit of the layout which seems to be an obvious culprit. I'll try the 'cut the wire' option and see what that tells me - nothing ventured, nothing gained!
Regards,
Andy
|
|
|
|
|
|
Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
Well, that's pretty much confirmed it - cut the lead, attached the multimeter probes and got zero output readings, so a new PSU is required. Thanks for the suggestion!
|
|
|
|
|
|
Joined: 08/05/2015(UTC) Posts: 577 Location: Tunbridge Wells, Kent, United Kingdom
|
Hi Andy.
I am in the process of dismantling a friend’s layout. In amongst the transformers etc, there is a Märklin 66361.
Quote
This switched mode power pack is for connecting to and supplying power to the 60112 or 60114/60113 or 60116 Track Box. The input is 230 volts / 50 Hertz / the output 18 volts / 36 watts DC voltage. The switched mode power pack is authorized for use as a toy and comes in a plastic housing. Dimensions 80 x 50 x 75 mm / 3-3/16" x 2" x 3". Connections: Hollow socket 5.5/2.5 mm, positive conductor inside.
Unquote
It has the European 2 pin plug but with a travel adapter I think it could do the job for you.
I would need to sell it but I am sure it will be a very reasonable price plus postage
Kind regards
Adrian
|
|
|
|
|
|
Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
Sounds like it might solve a problem, Adrian. Roughly how much are you looking for?
Thanks,
Andy
|
|
|
|
|
|
Joined: 08/05/2015(UTC) Posts: 577 Location: Tunbridge Wells, Kent, United Kingdom
|
Hi Andy,
£15 including postage. Would that work?
Kind regards
Adrian
|
|
|
|
|
|
Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
Sounds good! Will PM you for next steps.
Thanks,
Andy
|
|
|
|
|
|
Joined: 15/02/2016(UTC) Posts: 6 Location: England
|
Thanks once again, Adrian. Replacement PSU received, fitted, and the loco is back up and running. :-)
|
|
|
|
|
|
Joined: 08/05/2015(UTC) Posts: 577 Location: Tunbridge Wells, Kent, United Kingdom
|
Great News Andy,
Enjoy your trains
Best
Adrian
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
