marklin-users.net community | Forum

 
Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error
Power fail pass CV 113 not working with M4?
Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Previous Topic Next Topic
Offline Goofy  
#1 Posted : 06 February 2023 20:46:00(UTC)
Retweet
Goofy


Joined: 12/08/2006(UTC)
Posts: 9,012
When i use my ESU locomotives with M4 protocol i cannot find CV 113 adress that are to adjust power fail pass in the CS3.
Have i missed something?
I did checked after configuration format but no sign of the CV 113.
Any tip?
To use DCC protocol is waste of time when i did register my loco with M4.
H0
DCC = Digital Command Control
Back to top

Wish to join the discussion?! Login to your marklin-users.net community | Forum accountor Register a new forum account. Or Connect via Facebook  
Back to top  
Offline Copenhagen  
#2 Posted : 07 February 2023 00:21:36(UTC)
Retweet
Copenhagen


Joined: 23/04/2019(UTC)
Posts: 373
Location: Copenhagen, Denmark
I had to look in my notes. I have changed CV 113 on at least some of my locos with power cap, but I can see that I did it on an MS2.. while having the loco on the address 3 in dcc (even if the loco was working in mfx on my CS3). On the MS2 I could read and write different values.
Back to top
Offline applor  
#3 Posted : 07 February 2023 04:41:11(UTC)
Retweet
applor

Australia   
Joined: 21/05/2004(UTC)
Posts: 1,654
Location: Brisbane, Queensland
I think you'll need to add it as a DCC loco (keep the MFX registration) and after added you can change the CV on programming track, then just delete the DCC entry after you're done.
For me, I use the Lok programmer so haven't had to do it with a CS2.
modelling era IIIa (1951-1955) Germany
Back to top
Offline Goofy  
#4 Posted : 07 February 2023 06:59:39(UTC)
Retweet
Goofy


Joined: 12/08/2006(UTC)
Posts: 9,012
So it is not possible to use M4 protocol to get adress CV 113 to change power fail pass?
I thought ESU did verified that to use M4 protocol register all in the CS3 or ESU own station Ecos?
H0
DCC = Digital Command Control
Back to top
Offline applor  
#5 Posted : 08 February 2023 22:25:19(UTC)
Retweet
applor

Australia   
Joined: 21/05/2004(UTC)
Posts: 1,654
Location: Brisbane, Queensland
Originally Posted by: Goofy Go to Quoted Post
So it is not possible to use M4 protocol to get adress CV 113 to change power fail pass?



More accurately, the CV 113 is not present within the MFX programming space. I'd have to look at my CS2 but there may be an option to add a CV manually for MFX? I've done that for programming DCC.
The CV's aren't all listed on the CS2, since it doesn't know what the decoder is capable of.
modelling era IIIa (1951-1955) Germany
Back to top
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.345 seconds.