Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.



Go to last post in this topic Go to first unread post in this topic
Offline MALAVIKA  
#1 Posted : 26 November 2022 10:30:18(UTC)

Joined: 06/01/2019(UTC)
Posts: 20
Location: Maharashtra, Pune
Rear wheels don't rotate loco runs smoothly.
No crank movement either. Rear wheels don't rotate even manually
Please help
Offline JohnjeanB  
#2 Posted : 26 November 2022 12:48:57(UTC)

Joined: 04/02/2011(UTC)
Posts: 3,160
Location: Paris, France
Hi Malavika
What you describe it can be:
- traction wheels are seized because of old oil
- quartering issue (the wheels connot rotate because of the rods when te wheels are not aligned).

The most likely (if you did not apply force to rotate wheels) is the mechanism is seized.
Here is what you need to do:
- remove all housings
- remove the brushes, and it possible open the motor and remove the rotor
- use Isopropylic alcool with a brush on the gears, the axles until you can move freely the wheel
- assemble back and lubricate

thanks 1 user liked this useful post by JohnjeanB
Offline 60904  
#3 Posted : 29 December 2022 10:30:54(UTC)

Joined: 27/11/2007(UTC)
Posts: 327
I think he is talking about the none driven axles. They have to cleaned.
Offline nmbssncb  
#4 Posted : 31 December 2022 18:11:54(UTC)

Joined: 07/08/2008(UTC)
Posts: 27
Location: ,
The truck with the stuck wheels should be cleaned with benzine.
Are the wheel axles or truck rusty? Then use an anti-rust spray.

Offline ocram63_uk  
#5 Posted : 22 January 2023 10:44:05(UTC)

United Kingdom   
Joined: 07/01/2015(UTC)
Posts: 704
Location: England, Suffolk
I use WD-40 to get stuck wheels, cogwheels and any other moving bits to start moving again. Plus this fluid is slightly greasy so no need to oil afterwards.
Lighter fluid too can help
Offline MALAVIKA  
#6 Posted : 22 January 2023 12:28:07(UTC)

Joined: 06/01/2019(UTC)
Posts: 20
Location: Maharashtra, Pune
Helllo All,
Thanks for all the suggestions . I put a few drops of sewing machine oil with a toothpick and left the loco 3356 bottomside up for a day. That solved the problem it is running fine now.
Thanks very much
thanks 1 user liked this useful post by MALAVIKA
Users browsing this topic
OceanSpiders 2.0
Similar Topics
Marklin 3356 Question (H0-scale)
by rhobson1968 30/12/2009 01:22:04(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.647 seconds.