Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline fosuna  
#1 Posted : 03 March 2022 09:50:54(UTC)
fosuna

Spain   
Joined: 14/04/2015(UTC)
Posts: 58
Hi everyone!

The Märklin CS3 and CS3+ run with a Linux operating System.

My question is of anyone knows how the get a shell to run linux commands as 'cd', 'ls', etc. And also what is the file system structure to known where are the configuration files, and so on.

Also, if there is possible to access the file system throug a web browser.

The URL http://<CS3-IP-address>/config/ shows nothing in a web browser, though no error is reported.

Thanks a lot in advance.

Francisco
Francisco Osuna
https://fosuna.net
Offline Bigdaddynz  
#2 Posted : 04 March 2022 01:49:13(UTC)
Bigdaddynz

New Zealand   
Joined: 17/09/2006(UTC)
Posts: 18,671
Location: New Zealand
I suggest two things

#1 Read the following thread, especially KiwiAlan's post #25

https://www.marklin-user...48283findunread-CS3--CS3

#2 Contact

kiwiAlan Offline or Peter clapcott Offline who are the two members on the forum that I know have the most experience with the CS3 file system.

Edited by user 05 March 2022 02:22:01(UTC)  | Reason: Ooops, sorry, didn't complete point #2....

thanks 2 users liked this useful post by Bigdaddynz
Offline fosuna  
#3 Posted : 05 March 2022 07:26:06(UTC)
fosuna

Spain   
Joined: 14/04/2015(UTC)
Posts: 58
Originally Posted by: Bigdaddynz Go to Quoted Post
I suggest two things

#1 Read the following thread, especially KiwiAlan's post #25

https://www.marklin-user...48283findunread-CS3--CS3

#2 Contact

kiwiAlan Offline or Peter clapcott Offline who are the two members on the forum that I know have the most experience with the CS3 file system.


Thank you Bigdaddynz for your message. ThumpUp

Francisco
Francisco Osuna
https://fosuna.net
Offline FrankF  
#4 Posted : 05 April 2022 13:49:01(UTC)
FrankF

Denmark   
Joined: 18/11/2007(UTC)
Posts: 106
These files can be accessed from a Browser and show the CS 3 / 3+ - Configuration-files :

http://<CS3-IP-address>/config/geraet.vrs

http://<CS3-IP-address>/config/lokomotive.cs2

http://<CS3-IP-address>/config/fahrstrassen.cs2

http://<CS3-IP-address>/config/gleisbild.cs2

http://<CS3-IP-address>/config/magnetartikel.cs2


Take a Look at this Software which is "free" and can be used with Märklin CS 3 (60226) / 3+ (60216) and CS 2 ( 60215 / 60214 / 60213 )

https://www.railcontrol.org/index.php/en/

The Software also support the following Centrals :
- ESU ECOS / ESU CS1Reloaded ( both in Beta-version )
- Roco z21/Z21
- CAN Digital Bahn ( CC-Schnitte 2.1 )
- Digikejis DR5000
CS3+ 60216 ( SW:2.5.2 ) - MASTER / CS2 60215 ( SW:4.3.0 ) - SLAVE
MS2 60653/57 ( SW:4.13 ) / MS1 60652 ( SW:1.8AP ) / 60883 S88 LINK ( SW:1.1 )
MDT 3 (SW 3.6.0) - HW: 60970 / 60971 / 60801
ESU LOKPROGRAMMER ( SW 5.2.6 ) / ESU HW: 53451 / 53900 / 53901
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.484 seconds.