I have a few turners that do not work properly. Having bought a few decoders from Decoderwerk and installed as per instructions, two of three does push the tongue forward to change the line. Unfortunately they do not retract it to change the line to the other line. One works perfect.

Problem is I hear a click on one of the motors both ways but still no retraction. I have done the trick as adviced on Youtube to bridge the microswitch but still not working.

Another wideo showed a person with no microswitches at all, just bridged the two contact holes. Not sure it will work but shall give it a try

Any hints and tips most welcome.

Gunnar