Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.



Go to last post in this topic Go to first unread post in this topic
Offline 3864jk  
#1 Posted : 15 November 2020 20:33:38(UTC)

United Kingdom   
Joined: 03/07/2020(UTC)
Posts: 5
Location: England, Oxford
Some advice please: The Mfx decoder and the factory setting at code 60 do not seem to register on the mobile station. My other set is working OK on the Mobile system but the failed one has now been deleted from the controller and I cannot therefore reset it in Edit format

It showed up on the display with the flickering & Mfx sign arrows but did not settle into the working mode, although it had been working recently.

It will not register on any of my mobile systems nor on the IR controller at code 60.

At one point I detected a short warning symbol but it no longer produces this warning.

Many thanks in advance for any advice.


Problem solved!. It was a mechanical fault where the very weak axle wiper had become detached. Fortunately I was able to compare it with the working one and reattach and both now work. The wiper is split into a V shape and each side needs to be located individually against the axle support.

Hope this helps anyone in the future.

Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2020, Yet Another Forum.NET
This page was generated in 1.519 seconds.