Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline Thewolf  
#1 Posted : 31 May 2019 19:11:36(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Hi guys Cool

I have to review the track schematics of my layout, at least in some places.

Can someone tell me what's going on here?

Or is it Anyrail's problem?

Or is it my fault?

What did I forget in the circle?

essai 3 voies en courbe.jpg

Do I have to change software?

Thank you

Thewolf
Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Offline PeFu  
#2 Posted : 31 May 2019 19:57:20(UTC)
PeFu

Sweden   
Joined: 30/08/2002(UTC)
Posts: 610
Between R3 and R4, you can’t have 246xx turnouts. You need 247xx turnouts, as the distance between R3 and R4 curves should be more narrow than the distance between R2 and R3 curves. Changing software will give the same result.
The Great Krok!
Inspired by Swiss railways (SBB/BLS/SOB), C and K track, CS2, TrainController Gold V9
Offline Thewolf  
#3 Posted : 31 May 2019 20:29:55(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Thank youy PeFu Cool

I think now that this is correct .

essai 3 voies en courbe.jpg

It's a test for the layout of the future housing

Have a nice day

Thewolf
Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Offline rrf  
#4 Posted : 31 May 2019 20:30:53(UTC)
rrf

United States   
Joined: 15/11/2009(UTC)
Posts: 232
Location: Silver Spring, Maryland USA
Hello,

One can also use a combination of 24064's and 24077s at the 90 degree point of your curves to adjust the R3 / R4 / R5 track separation of 64 mm to match the the R1 / R2 / R3 track separation of 77 mm. (or vise versa).

Regards,



Rob
Mackenrode Wende Bahn
Offline Thewolf  
#5 Posted : 31 May 2019 20:39:04(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Originally Posted by: rrf Go to Quoted Post
Hello,

One can also use a combination of 24064's and 24077s at the 90 degree point of your curves to adjust the R3 / R4 / R5 track separation of 64 mm to match the the R1 / R2 / R3 track separation of 77 mm. (or vise versa).

Regards,





Thank you rrfCool

Very appreciated for the future

Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Offline kiwiAlan  
#6 Posted : 31 May 2019 23:49:14(UTC)
kiwiAlan

United Kingdom   
Joined: 23/07/2014(UTC)
Posts: 4,297
Location: ENGLAND, Didcot
Originally Posted by: Thewolf Go to Quoted Post
Thank youy PeFu Cool

I think now that this is correct .

essai 3 voies en courbe.jpg

It's a test for the layout of the future housing

Have a nice day

Thewolf


Nearly correct.

The straight leg of the 24711/2 also needs a 24071 between it and the 24172. The 24711/2 on the middle track will also need a 24071 on its straight leg. Check the diagram in the Marklin catalogue and you will see what I mean.



Offline Bones  
#7 Posted : 01 June 2019 15:45:33(UTC)
Bones

Australia   
Joined: 15/09/2015(UTC)
Posts: 48
Location: Queensland, Oxley
Sadly Wolf it was your fault

You failed to allow for the smaller spacing between the 2 largest radii, however you won't be the last if that consoles you
Offline Thewolf  
#8 Posted : 01 June 2019 16:02:07(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Originally Posted by: Bones Go to Quoted Post
Sadly Wolf it was your fault

You failed to allow for the smaller spacing between the 2 largest radii, however you won't be the last if that consoles you


This is Thewolf, not WolfMad
Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Offline Thewolf  
#9 Posted : 01 June 2019 16:05:10(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Originally Posted by: kiwiAlan Go to Quoted Post
Originally Posted by: Thewolf Go to Quoted Post
Thank youy PeFu Cool

I think now that this is correct .

essai 3 voies en courbe.jpg

It's a test for the layout of the future housing

Have a nice day

Thewolf


Nearly correct.

The straight leg of the 24711/2 also needs a 24071 between it and the 24172. The 24711/2 on the middle track will also need a 24071 on its straight leg. Check the diagram in the Marklin catalogue and you will see what I mean.





Thank you Alan Cool

You are right .

I'm very distracted these days.

Now this is correct

essai 3 voies en courbe.jpg

Thewolf

Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Offline kiwiAlan  
#10 Posted : 01 June 2019 16:54:51(UTC)
kiwiAlan

United Kingdom   
Joined: 23/07/2014(UTC)
Posts: 4,297
Location: ENGLAND, Didcot
Originally Posted by: Thewolf Go to Quoted Post


Thank you Alan Cool

You are right .

I'm very distracted these days.

Now this is correct

essai 3 voies en courbe.jpg

Thewolf



Yep, that is much better. ThumpUp
thanks 1 user liked this useful post by kiwiAlan
Offline Bones  
#11 Posted : 04 June 2019 05:47:02(UTC)
Bones

Australia   
Joined: 15/09/2015(UTC)
Posts: 48
Location: Queensland, Oxley
Originally Posted by: Thewolf Go to Quoted Post
Originally Posted by: Bones Go to Quoted Post
Sadly Wolf it was your fault

You failed to allow for the smaller spacing between the 2 largest radii, however you won't be the last if that consoles you


This is Thewolf, not WolfMad


Sorry didn't mean to be rude

Offline Thewolf  
#12 Posted : 04 June 2019 15:28:18(UTC)
Thewolf

Canada   
Joined: 08/09/2015(UTC)
Posts: 1,489
Location: Longueuil-Canada
Originally Posted by: Bones Go to Quoted Post
Originally Posted by: Thewolf Go to Quoted Post
Originally Posted by: Bones Go to Quoted Post
Sadly Wolf it was your fault

You failed to allow for the smaller spacing between the 2 largest radii, however you won't be the last if that consoles you


This is Thewolf, not WolfMad


Sorry didn't mean to be rude



No problem Cool

Project Laurentides-Neudstadt-CS2-Track C- Itrain-Digital
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2019, Yet Another Forum.NET
This page was generated in 0.597 seconds.