 Joined: 29/05/2014(UTC) Posts: 839 Location: DONEGAL, CARNDONAGH
|
Hi guys ,I just got a nice 3070 Tee set good condition with box but no paperwork.When I went to put it together I found out that the drive unit is missing the plug to connect to the middle unit. All thats there are 3 wires, red,, white, and blue. Center unit is fine as is the end unit.Im sure the front unit should have a plug .The end of the wires are like whats on the 451 crane to connect the magnet wires to cab Can I get the 3 pin plug and which wires go where on the plug. The drive unit works fine but thats all I can test without that plug. Regards Eddie
|
|
|
|
|
|
 Joined: 14/03/2005(UTC) Posts: 15,870 Location: Gibraltar, Europe
|
Hi Eddie, I have the 3071 which is a little different and has only two wires between units, but mine has a plug at one end and a socket at the other end of the centre unit(s). Maybe the ends of the wires you have will fit in the socket on the middle unit? Have you tried?
|
Ray
Mostly Marklin.Selection of different eras and European railways
Small C track layout, control by MS2, 100+ trains but run 4-5 at a time.
|
 1 user liked this useful post by RayF
|
|
|
|
Joined: 29/05/2014(UTC) Posts: 839 Location: DONEGAL, CARNDONAGH
|
Hi Ray, the middle unit is the same, but I dont want to short anything out by putting the wires in the wrong place. I assume one of the wires is the feed but dont know which is which.Eddie
|
|
|
|
|
|
 Joined: 17/04/2003(UTC) Posts: 997 Location: Netherlands
|
I made one myself using 3 nails and a blob of hot glue. 
|
4 users liked this useful post by Gregor
|
|
|
|
Joined: 01/06/2016(UTC)
Posts: 2,465
|
|
4 users liked this useful post by TEEWolf
|
|
|
|
Joined: 29/05/2014(UTC) Posts: 839 Location: DONEGAL, CARNDONAGH
|
Thank you ,RayF, Gregor and Tee Wolf, I think I will go with the part from TTN shop. I should be able to work that without too much trouble. Again ,thank you guys for taking the time to answer. Eddie
|
|
|
|
|
|
 Joined: 14/01/2006(UTC) Posts: 1,802 Location: Wurttemberg
|
Hi Eddie, My father has drawn this diagram for the 3070 nearly 20 years ago. I added some translations:  Edit: BLAU = blue Regards Markus
|
6 users liked this useful post by Markus Schild
|
|
|
|
Joined: 29/05/2014(UTC) Posts: 839 Location: DONEGAL, CARNDONAGH
|
Thanks very much Markus,Its nice to see where and what the wires go to . Very useful . Eddie
|
|
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
