Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline railfanwai  
#1 Posted : 22 April 2018 00:29:29(UTC)
railfanwai

Canada   
Joined: 22/04/2018(UTC)
Posts: 11
Location: Alberta, Calgary
Hi , I have a Trix Schnabel Car 24 axles 24338 , it has been assembled already, just wondering how to take them apart n put it back to the box,those plastic bolts u can snap it into the holes and the holes get bolted but i can’t take it out even though I tried to use a tweezer to squeeze it , to no avail!
Offline JohnjeanB  
#2 Posted : 22 April 2018 13:00:02(UTC)
JohnjeanB

France   
Joined: 04/02/2011(UTC)
Posts: 3,084
Location: Paris, France
Hi Railfanwai

I don't have the 24338 car but from the pictures seen on the web I assume it is linked with the difficulty to unsnap those plastic axles as in regular car bogies.
If it is, then you may ease the unsnapping by using long nose flat pliers to force (gently) close the 2 sides of the bogie axle while pulling away the bogie.

Cheers

Jean
thanks 1 user liked this useful post by JohnjeanB
Offline railfanwai  
#3 Posted : 22 April 2018 20:59:29(UTC)
railfanwai

Canada   
Joined: 22/04/2018(UTC)
Posts: 11
Location: Alberta, Calgary
Originally Posted by: JohnjeanB Go to Quoted Post
Hi Railfanwai

I don't have the 24338 car but from the pictures seen on the web I assume it is linked with the difficulty to unsnap those plastic axles as in regular car bogies.
If it is, then you may ease the unsnapping by using long nose flat pliers to force (gently) close the 2 sides of the bogie axle while pulling away the bogie.

Cheers

Jean


Thanks. I’ll try
Offline railfanwai  
#4 Posted : 23 April 2018 01:19:55(UTC)
railfanwai

Canada   
Joined: 22/04/2018(UTC)
Posts: 11
Location: Alberta, Calgary
Originally Posted by: JohnjeanB Go to Quoted Post
Hi Railfanwai

I don't have the 24338 car but from the pictures seen on the web I assume it is linked with the difficulty to unsnap those plastic axles as in regular car bogies.
If it is, then you may ease the unsnapping by using long nose flat pliers to force (gently) close the 2 sides of the bogie axle while pulling away the bogie.

Cheers

Jean


https://www.google.ca/se...mp;imgrc=Vgd77E8kVpU1WM:
Offline railfanwai  
#5 Posted : 23 April 2018 01:27:12(UTC)
railfanwai

Canada   
Joined: 22/04/2018(UTC)
Posts: 11
Location: Alberta, Calgary
Watch video above please, that plastic bolt is under the end of the girder, so it’s between girder n bridge, actually I haven’t tried to take it apart yet, because I have to take off screws from the bottom of the longest bridge the I can reach it, , but I have tried to take off other plastic bolts in other parts but to no avail
Users browsing this topic
Similar Topics
Will trix release schnabel cars again ?? (H0-scale)
by railfanwai 05/08/2018 01:57:44(UTC)
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.378 seconds.