Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline Moritz-BR365  
#1 Posted : 03 November 2017 13:08:28(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
Hello,
I converted my brand new V 3201 insider model Märklin 3720 into an sound loco.

UserPostedImage

First, I equipped the motor chield and the other bearing with ball bearings. This is done as usual and provides better, smoother and more silent driving.

Then, I created a sound project with the mDecoderTool3. But, I don't know why, when flashing the sound project with the CS2, the flash process hangs right from the beginning:

UserPostedImage

Therefore, as intermediate solution, I used an Doehler&Haass SD21A-4 with a not really right sound of an DSB MY (NOHAB):



OK, the sound project is wrong, but the sound is quite well. I recorded only with my smartphone, I will do a better recording with wy video cam and external microfone later.

The defect mSD sound decoder will be send to Märklin.

Regards,
Moritz
thanks 6 users liked this useful post by Moritz-BR365
Offline Moritz-BR365  
#2 Posted : 05 November 2017 18:05:59(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
V 36 Soundproject

thanks 2 users liked this useful post by Moritz-BR365
Offline Moritz-BR365  
#3 Posted : 06 November 2017 10:57:50(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
UserPostedImage
Offline Moritz-BR365  
#4 Posted : 07 November 2017 08:06:21(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
And here finally some pictures from the interior:

With double faced adhesive tape I attached the Doehler&Haass MT21 adaptor onto the original decoder mount:

UserPostedImage

I use the big speaker from the mSD set. There is enough space to mount the speaker on top of the smoke generator holder with double faced adhesive tape.

UserPostedImage

The motor shield was equiopped with a ball bearing as well as the gear side of the anchor shaft:

UserPostedImage

There is enough space for a big capacitor or a second speaker

UserPostedImage

The miniature bulbs are plugged into isolated bulb sockets. Therefore, it's easy to connect them to light AUX ports and decoder plus (U+, orange).
thanks 1 user liked this useful post by Moritz-BR365
Offline Moritz-BR365  
#5 Posted : 08 November 2017 08:30:25(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
V 3201 in slow motion:

Offline Moritz-BR365  
#6 Posted : 08 January 2018 07:55:21(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
Hello again,
I created two new sound projects with a combined Diesel and steam engine sound.

The first sound project is based on an P8 steam engine and an Renfe 319.3 Diesel sound.



The second sound project is based on an P8 steam engine and an V36 Diesel sound.

thanks 1 user liked this useful post by Moritz-BR365
Offline Moritz-BR365  
#7 Posted : 15 January 2018 07:34:41(UTC)
Moritz-BR365

Germany   
Joined: 02/04/2013(UTC)
Posts: 682
Finally, I designed a speaker box with Polystyrol to get a better bass sound:

UserPostedImage

But the speaker box was too big, therefore, I had to attache a second speaker on top. Otherwise the speaker cames to its limits and start to distort.

UserPostedImage

UserPostedImage

thanks 3 users liked this useful post by Moritz-BR365
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2022, Yet Another Forum.NET
This page was generated in 0.371 seconds.