Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline Goofy  
#1 Posted : 07 October 2016 10:19:02(UTC)
Goofy


Joined: 12/08/2006(UTC)
Posts: 8,993
Hello!
I show up this pictures by tell to you about important to clean the wheels and the rail.
With this message you can see when you have problem on the track too.
Even Märklinist do have an enemy...dirt!
I use cotton top by clean the wheels and it works easy.
With the pictures of the locomotive you see before and after the clean of the wheels by use cotton top and electronic spray name PRF 6-68.

DSC_0025_361.JPGDSC_0024_360.JPGDSC_0026_362.JPG
H0
DCC = Digital Command Control
thanks 3 users liked this useful post by Goofy
Offline Purellum  
#2 Posted : 07 October 2016 21:18:03(UTC)
Purellum

Denmark   
Joined: 08/11/2005(UTC)
Posts: 3,498
Location: Mullerup, 4200 Slagelse
Cool

The MSDS is not very nice:

http://www.tme.eu/gb/Doc...387c1719eb0bc/PRF__6-68_[ENG].pdf

Per.

Cool
If you can dream it, you can do it!

I, the copyright holder of this work, hereby release it into the public domain. This applies worldwide.

In case this is not legally possible:
I grant anyone the right to use this work for any purpose, without any conditions, unless such conditions are required by law.

UserPostedImage
thanks 1 user liked this useful post by Purellum
Offline SteamNut  
#3 Posted : 07 October 2016 22:01:15(UTC)
SteamNut

United States   
Joined: 11/05/2013(UTC)
Posts: 488
I have had gunk so bad on some old used cars and loks that I first used a toothpick to scrape it off, I believe the gunk came from the rubber traction tires. The final cleaning was done with either rubbing alcohol, GOO GONE or Track Magic. Now I try to do this once a year and check for loose screws as I have lost them in the past - Fred
Offline nitramretep  
#4 Posted : 08 October 2016 01:27:18(UTC)
nitramretep

United States   
Joined: 22/01/2015(UTC)
Posts: 207
Location: lower hudson valley, ny
Goofy, If you are going to use that cleaner I would suggest you have a fan extracting the fumes away from you (out side if possible). At the very least wear a disposable dust or other mask (like a 3M vapor or IFW frated mask), those fumes can affect your lungs and even your internal organs. If you're an older person the consequences can be pretty nasty as regards your airway. I use a less toxic "gun cleaner" that is an organic (less toxic) degreaser made by Birchwood Casey. These cleaning chemicals can have longterm effects, a friend of mine used acetone for many years building fiber glass steam boats, even with gloves, his skin on his hands is damaged and require constant moisturizing.
Offline dickinsonj  
#5 Posted : 08 October 2016 01:43:52(UTC)
dickinsonj

United States   
Joined: 05/12/2008(UTC)
Posts: 1,676
Location: Crozet, Virginia
I do keep my trains pretty clean, so I am not dealing with massive buildups of crud - but all of my cleaning is handled by cheap, readily available isopropyl alcohol. Using that for cleaning is WAY safer than electronic cleaning agents.

I would suggest that if IPA does not clean up your equipment you might want to improve your maintenance routines. BigGrin

All MRR stuff works best when it is clean!

Edited by user 08 October 2016 15:35:29(UTC)  | Reason: Not specified

Regards,
Jim

I have almost all Märklin and mostly HO, although I do have a small number of Z gauge trains!
So many trains and so little time.
Offline Goofy  
#6 Posted : 08 October 2016 10:39:05(UTC)
Goofy


Joined: 12/08/2006(UTC)
Posts: 8,993
Originally Posted by: nitramretep Go to Quoted Post
Goofy, If you are going to use that cleaner I would suggest you have a fan extracting the fumes away from you (out side if possible). At the very least wear a disposable dust or other mask (like a 3M vapor or IFW frated mask), those fumes can affect your lungs and even your internal organs. If you're an older person the consequences can be pretty nasty as regards your airway. I use a less toxic "gun cleaner" that is an organic (less toxic) degreaser made by Birchwood Casey. These cleaning chemicals can have longterm effects, a friend of mine used acetone for many years building fiber glass steam boats, even with gloves, his skin on his hands is damaged and require constant moisturizing.


I´m pretty sure you have same problem by use smoke fluid for the steam locomotive.
To clean the wheels and the rail is not easy way,but if you know what you are doing by care,just go ahead!

H0
DCC = Digital Command Control
thanks 1 user liked this useful post by Goofy
Users browsing this topic
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.482 seconds.