Welcome to the forum   
Welcome Guest! To enable all features please Login or Register.

Notification

Icon
Error

Share
Options
View
Go to last post in this topic Go to first unread post in this topic
Offline Armando  
#1 Posted : 04 February 2005 06:18:20(UTC)
Armando

United States   
Joined: 21/07/2003(UTC)
Posts: 1,352
Location: Houston, Texas
Hello everyone:

Has it ever been documented if the Seuthe or similar smoke fluids eventually damage the paint finish on the steam locomotives? I have noticed that the fluid leaves an oily or greasy residue on the paint, around the funnel area, but it usually evaporates without leaving a trace.
Also, how do you prevent the smoke generator from "spattering" fluid around, which is actually the reason why it falls on the locomotive's body?
Greetings from Montreal,

Armando
Best regards,
Armando García

Offline steventrain  
#2 Posted : 04 February 2005 11:52:05(UTC)
steventrain

United Kingdom   
Joined: 21/10/2004(UTC)
Posts: 31,606
Location: United Kingdom
hello,

Make sure drop of fluid four/five time on 7226 unit and four drop on 72270.Dont drop more than four or five on unit or it will blow fluid out of unit onto body.
Large Marklinist 3- Rails Layout with CS2/MS2/Boosters/C-track/favorites Electric class E03/BR103, E18/E118, E94, Crocodiles/Steam BR01, BR03, BR05, BR23, BR44, BR50, Big Boy.
Offline dudok12  
#3 Posted : 07 February 2005 09:35:17(UTC)
dudok12


Joined: 25/08/2004(UTC)
Posts: 152
Location: Eindhoven,
Hi,

I have been known to slightly miss the funnel when dripping in the smoke fluid... However, my steamers with smoke show no signs of paint peeling etc. because of this. The fluid just evaporates without a trace, luckily.

HTH, Bernhard
IB since 2000. Latest loc aquisition: 37554 BR 55 a long time ago...
Offline Davy  
#4 Posted : 07 February 2005 17:11:26(UTC)
Davy


Joined: 29/08/2003(UTC)
Posts: 1,915
Location: Netherlands
And because the smoke tube is from metal. It can not melt.
And there will be not much loss of paint. And after a lot a years it will weather nicely.
M-track with a CS2.
Offline Sander van Wijk  
#5 Posted : 08 February 2005 00:11:23(UTC)
Sander van Wijk

Netherlands   
Joined: 20/04/2003(UTC)
Posts: 2,248
Location: Amsterdam, Netherlands; Göteborg, Sverige,
Hi Bernhard,

If you would like to fill the smoke generator in an easier way. Just use a cyringe, it makes you can hardly miss!

I've got one other question, a simple law in physics says that what goes up, must come down. Does anyone have the experience that after using a smoke generator for a longer while the environment get's a very thin oil film over it?
Sander
---
Era I(b): K.Bay.Sts.B. and K.W.St.E.
Offline dudok12  
#6 Posted : 08 February 2005 10:28:03(UTC)
dudok12


Joined: 25/08/2004(UTC)
Posts: 152
Location: Eindhoven,
Hi Sander,

You are right, I should use a syringe to inject the fluid. I now use an 'eye dropper'. On my dark attic it is easy to miss the funnel with this blunt instrument.

I would not expect an oil film on anything after using smoke fluid as it evaporates quickly without residue. IHMO there are no oily ingredients in the fluid. It is more like a solvent and I use it as such to clean my tracks. It removes black gunk from the rails quite well Smile.

Bernhard
IB since 2000. Latest loc aquisition: 37554 BR 55 a long time ago...
Users browsing this topic
OceanSpiders 2.0
Forum Jump  
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.

| Powered by YAF.NET | YAF.NET © 2003-2024, Yet Another Forum.NET
This page was generated in 0.588 seconds.