Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
Here is the first video of the final prototype of the RABe 501 Giruno. The production model should be in stores very soon. The Maerklin model (base set) should be available in around a month's time. Regards Mike C Edited by user 11 November 2022 02:09:29(UTC)
| Reason: Not specified
|
 8 users liked this useful post by mike c
|
|
|
Joined: 28/03/2007(UTC) Posts: 303 Location: Torino,
|
I saw it live in Friedrichshafen (where this video was taken), it runs smooth and silent. The Märklin one was displayed in a showcase, only one half. BTW, no Märklin Ae3/6 displayed
|
 1 user liked this useful post by mario54i
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
Both versions are excellent imho! I think only subtle differences. The Piko only comes as an 11 unit train, and the msrp is nearly 1,700 euros. Too long for my layout I think. I reserved the Marklin last January, but I expect it to be late, as model releases have been lately. That's fine, as I had abdominal surgery in September, and the insurance co pay cost us almost $5,00 U.S. Perhaps I may order one supplimental car set later. Someone told me the intital release is only for Switzeraldn for the Piko?? I viwed an Instagram story from Carerra modelismo in Chaisso, and they have it.
|
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
I preordered the Piko (Arwico) model when it was announced. The price at the time was 1490 CHF for the AC version. I have the Maerklin model on order as well. I ordered the base set plus the three additional sets. Total cost of the Maerklin version w/o VAT was just over 1000 EUR.
Regards
Mike C
|
 2 users liked this useful post by mike c
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
My early intro reservation price is 719 euros for the Marklin 5 unit train 39810. Thats $740 U.S. The lowest price I found stateside was $818. Even if shipping rates have doubled, still a good value.
|
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
Originally Posted by: mike c  https://www.youtube.com/watch?v=V_pA2nhN7l8
Here is the first video of the final prototype of the RABe 501 Giruno. The production model should be in stores very soon. The Maerklin model (base set) should be available in around a month's time.
Regards
Mike C P.S., Lippe shop told me January for the Marklin. regards, Mike.
|
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
|
 3 users liked this useful post by mike c
|
|
|
Joined: 18/02/2008(UTC) Posts: 1,334
|
Another video of the Piko: |
Best regards, Miguel
Mostly Märklin H0.
|
 1 user liked this useful post by mbarreto
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
Judging by pics by Marklin, it too looks to have lighted seating/destination signs on the doors. I don't know about the opening nose for multi-unit couplings. I wonder what the red marker light behing the lower windshield is for?
|
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
new videos (Presentation and Unboxing) from Arwico (Piko) Regards Mike C
|
 3 users liked this useful post by mike c
|
|
|
Joined: 18/02/2008(UTC) Posts: 1,334
|
Hello, I found in Youtube a video with a preproduction unit of the Märklin Giruno: It seems to run smooth, but I don't know if it is running at top speed. I would like to see it at higher speed. Regards, Miguel |
Best regards, Miguel
Mostly Märklin H0.
|
 1 user liked this useful post by mbarreto
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
As my steepest grade is more than 3%, I will see how it handles it with a 5 unit consist before ordering a supplimental car set. My ICE 3 slows by 2/3 speed on it with a 5 unit train. It is supposed to pull/push an 8 unit.
|
 1 user liked this useful post by marklinist5999
|
|
|
Joined: 22/01/2009(UTC) Posts: 14,875 Location: On 1965 Märklin Boulevard just around from Roco Square
|
Hornby OO bought out the Flying Scotsman with 6 different versions with the following road numbers 1472, (4472 = 2 tender), 4472, (4472 =Alan Pegler), 103, 60103 at £ 362.99, there is one with a second tender for £ 379.99, if you buy all 6 versions it will set you back to a total of £ 2194.94 and if you want them shipped to Australia most probably another £ 100.00 on postage., it wouldn't be asking too much for a Christmas present, would it be ? |
|
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
John, what does a Flying Scotsman have to do with this topic?
Regards
Mike C
|
|
|
|
Joined: 18/02/2008(UTC) Posts: 1,334
|
Mike,
I am curious in know which Giruno (Piko or Märklin) will have a more powerfull motor so it will have better results in terms of higher speed and more capable of hold speed when climbing a decent gradient.
Of course, gear ratio and weight will also have their own effect in the outcome.
If when you have both you can do a comparison, it would be very good! I am almost convinced to order the Märklin as it is cheaper if I don't want the full train, it has controllable pantographs, I don't have to order it from a Swiss dealer and I like Märklin :-)
Regards, Miguel |
Best regards, Miguel
Mostly Märklin H0.
|
 1 user liked this useful post by mbarreto
|
|
|
Joined: 23/07/2014(UTC) Posts: 8,481 Location: ENGLAND, Didcot
|
Looking at the unpacking video for the Piko one it looks like they were going to do it as a 5 piece plus addon sets, then decided to package it all together.
I wonder if later versions will be done as split sets as Marklin are doing.
|
 2 users liked this useful post by kiwiAlan
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
Originally Posted by: mbarreto  Mike,
I am curious in know which Giruno (Piko or Märklin) will have a more powerfull motor so it will have better results in terms of higher speed and more capable of hold speed when climbing a decent gradient.
Of course, gear ratio and weight will also have their own effect in the outcome.
If when you have both you can do a comparison, it would be very good! I am almost convinced to order the Märklin as it is cheaper if I don't want the full train, it has controllable pantographs, I don't have to order it from a Swiss dealer and I like Märklin :-)
Regards, Miguel An expensive test to buy both, but I bet they are so similar in performance because both have can motors, and cardan shaft drive. I'm sure that both Piko and Marklin engineered the gearing to scale. I think the Piko ho ICE 4 has two motors, but in my experience with models like the original Marklin ICE which had two Faulhaber motors, and running both my br 610 and 612 railcars in a tandem consist, there is little difference in pulling ability. Two motors drawing amperage together lowers available power, speed, and torque. They may be able to pull more weight, but not as fast. The amperage needle rises by half way more to voltage my analog transformer. More amperage draw, lower voltage output.
|
 1 user liked this useful post by marklinist5999
|
|
|
Joined: 18/02/2008(UTC) Posts: 1,334
|
Originally Posted by: marklinist5999  ... I think the Piko ho ICE 4 has two motors, but in my experience with models like the original Marklin ICE which had two Faulhaber motors, and running both my br 610 and 612 railcars in a tandem consist, there is little difference in pulling ability. Two motors drawing amperage together lowers available power, speed, and torque. They may be able to pull more weight, but not as fast. The amperage needle rises by half way more to voltage my analog transformer. More amperage draw, lower voltage output. ...
With 2 motors there will also be more power available for avoid speed reduction when going up. Load regulation also helps keep the speed constant independent of gradient, but only if the motor is powerful enough. Regards, Miguel |
Best regards, Miguel
Mostly Märklin H0.
|
 1 user liked this useful post by mbarreto
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
Originally Posted by: mbarreto  Mike,
I am curious in know which Giruno (Piko or Märklin) will have a more powerfull motor so it will have better results in terms of higher speed and more capable of hold speed when climbing a decent gradient.
Of course, gear ratio and weight will also have their own effect in the outcome.
If when you have both you can do a comparison, it would be very good! I am almost convinced to order the Märklin as it is cheaper if I don't want the full train, it has controllable pantographs, I don't have to order it from a Swiss dealer and I like Märklin :-)
Regards, Miguel I have ordered both. The Piko should be released any day now and the Maerklin base set is still listed for December. I will post a comparison review once both models are in my hands. Regards Mike C
|
 1 user liked this useful post by mike c
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
Originally Posted by: kiwiAlan  Looking at the unpacking video for the Piko one it looks like they were going to do it as a 5 piece plus addon sets, then decided to package it all together.
I wonder if later versions will be done as split sets as Marklin are doing. The Arwico/Piko "Ceneri" edition is sold as an 11 piece set. The main version will be available later (2023/24) and will be a more basic version, without built-in lighting and may come in form of a base set and one or two add-on sets. The Unboxing video shows the box containing the main part with both pilot coaches, the restaurant and two additional coaches. The train cannot prototypically be assembled with just the coaches in the main part. The Maerklin set includes the two pilot coaches plus the restaurant and adjacent coaches. The Maerklin add-on set include the coaches that go between the core and each of the pilot coaches. Regards Mike C
|
 1 user liked this useful post by mike c
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
Zuba Tech demonstration video of Piko's Giruno: Regards Mike C
|
 4 users liked this useful post by mike c
|
|
|
Joined: 31/12/2003(UTC) Posts: 77 Location: Singapore, Singapore
|
There is a discussion on the Swiss Model Railways Facebook group for ARWICO / PIKO Giruno that PIKO is supplying the loco bodies to Marklin for their Giruno. If this information is correct then it appears to be an interesting collaboration between the two companies.
|
 1 user liked this useful post by Rajnish
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
|
 4 users liked this useful post by mike c
|
|
|
Joined: 22/01/2009(UTC) Posts: 14,875 Location: On 1965 Märklin Boulevard just around from Roco Square
|
Originally Posted by: mike c  John, what does a Flying Scotsman have to do with this topic?
Regards
Mike C It suppose to be a new post |
|
|
|
|
Joined: 31/12/2003(UTC) Posts: 77 Location: Singapore, Singapore
|
Mike Each of the companies are still using their unique electronics and electro mechanical systems. Building the moulds for a new multi-unit train is expensive and time consuming.
J am still not ruling it out that there is collaboration between the two companies. We will know in due course once we have both the models in hand to do a side by side comparison.
|
 1 user liked this useful post by Rajnish
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
Originally Posted by: Rajnish  Mike Each of the companies are still using their unique electronics and electro mechanical systems. Building the moulds for a new multi-unit train is expensive and time consuming.
J am still not ruling it out that there is collaboration between the two companies. We will know in due course once we have both the models in hand to do a side by side comparison. Rajnish, Note the end of the chassis: Piko: https://www.suter-meggen...ailbilder/05.97230.9.JPGMaerklin: https://static.maerklin....5e764758341664366409.jpgI rest my case Regards Mike C
|
 1 user liked this useful post by mike c
|
|
|
Joined: 10/02/2021(UTC) Posts: 3,914 Location: Michigan, Troy
|
Marklin has changed the delivery date of it's 39810 Giruno from December to January.
|
 1 user liked this useful post by marklinist5999
|
|
|
Joined: 23/07/2014(UTC) Posts: 8,481 Location: ENGLAND, Didcot
|
Originally Posted by: marklinist5999  Marklin has changed the delivery date of it's 39810 Giruno from December to January. That is not surprising, they haven't yet delivered the 39771 Insider 2 loco that was due in November, although the first wagon sets for it which were also due in November have started to appear in the last week.
|
 1 user liked this useful post by kiwiAlan
|
|
|
Joined: 17/01/2004(UTC) Posts: 849 Location: Vic, Barcelona
|
Originally Posted by: kiwiAlan  Originally Posted by: marklinist5999  Marklin has changed the delivery date of it's 39810 Giruno from December to January. That is not surprising, they haven't yet delivered the 39771 Insider 2 loco that was due in November, although the first wagon sets for it which were also due in November have started to appear in the last week. I have the second lok and their pair freight car |
|
 1 user liked this useful post by vilithejou
|
|
|
Joined: 23/07/2014(UTC) Posts: 8,481 Location: ENGLAND, Didcot
|
Originally Posted by: vilithejou  Originally Posted by: kiwiAlan  That is not surprising, they haven't yet delivered the 39771 Insider 2 loco that was due in November, although the first wagon sets for it which were also due in November have started to appear in the last week.
I have the second lok and their pair freight car ooh, lucky you  , you must have only just unpacked the loco. Of several shops that show it on their catalogue, all show it as not yet delivered, although they show the wagonset as delivered. The other item I am awaiting is the 46415 regional MHI wagon, but that doesn't seem to be delivered yet either.
|
 1 user liked this useful post by kiwiAlan
|
|
|
Joined: 28/11/2007(UTC) Posts: 8,238 Location: Montreal, QC
|
A quick video on my improvised teppichbahn I have to see if I can reduce the slider noise. Regards Mike C
|
 4 users liked this useful post by mike c
|
|
|
Joined: 18/02/2008(UTC) Posts: 1,334
|
|
Best regards, Miguel
Mostly Märklin H0.
|
 1 user liked this useful post by mbarreto
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.