Lokpilot & SUSI.

Welcome Guest! To enable all features please Login or Register.

Notification

Error

Lokpilot & SUSI. - How to connect a SUSI device to a Lokpilot with 21MTC interfce?

Options

View

Previous Topic Next Topic

jorge_vilarrubi		#1 Posted : 07 February 2015 00:39:42(UTC) Retweet
Joined: 15/12/2003(UTC) Posts: 655 Location: Buenos Aires,		Hi all, Does anybody know any way for connecting a SUSI device (a sound module in this case) to a Lokpilot V4.0 M4 with 21MTC interface? The Lokprogrammer shows an option to enable SUSI, but I couldn't find any information about how to connect the module to the decoder. Any help will be welcome. Thanks in advance. Jorge Vilarrubi, Buenos Aires, Argentina
		Jorge Vilarrubí Buenos Aires ARGENTINA


User Profile View All Posts by User View Thanks


	Wish to join the discussion?! Login to your marklin-users.net community \| Forum account or Register a new forum account. Or Connect via Facebook

H0		#2 Posted : 07 February 2015 08:13:23(UTC) Retweet
Joined: 16/02/2004(UTC) Posts: 15,265 Location: DE-NW		Hi! Some locos have a SUSI socket on the loco board. Otherwise you can always cut off the plug and solder the connections.
		Regards Tom --- "In all of the gauges, we particularly emphasize a high level of quality, the best possible fidelity to the prototype, and absolute precision. You will see that in all of our products." (from Märklin New Items Brochure 2015, page 1) ROFLBTCUTS


User Profile View All Posts by User View Thanks

jorge_vilarrubi		#3 Posted : 07 February 2015 13:02:45(UTC) Retweet
Joined: 15/12/2003(UTC) Posts: 655 Location: Buenos Aires,		Hi Tom, thanks for your reply. My question is related to a Decoder-to-SUSI connection. SUSI standards establish both a protocol and a wiring scheme. Pin1 - black - Ground Pin2 - gray - Data Pin3 - blue - Clock Pin4 - red - Power (Unregulated + track voltage) Whay I need to know is to what pins of the 21MTC I have to connect the four SUSI wires. Soldering the wires to the decoder is not a problem. Regards, Jorge.
		Jorge Vilarrubí Buenos Aires ARGENTINA


User Profile View All Posts by User View Thanks

biedmatt		#4 Posted : 07 February 2015 13:46:21(UTC) Retweet
Joined: 09/04/2012(UTC) Posts: 1,343 Location: Southwest Ohio		Hello, I would think your best place to find an answer is here: http://www.esu.eu/en/dow...anuals/digital-decoders/ If the maker of the decoder can not tell you what you need, I do not know who could.
		Matt Era 3 DB lokos, coaches and freight cars from across Europe But I do have the obligatory (six) SBB Krocs ECoS 50200, all FX and MFX decoders replaced with ESU V4s, operated in DCC-RailCom+ with ABC brake control. With the exception of the passenger wagens with Marklin current conducting couplers, all close couplers have been replaced with Roco 40397.


User Profile View All Posts by User View Thanks

jorge_vilarrubi		#5 Posted : 07 February 2015 15:02:47(UTC) Retweet
Joined: 15/12/2003(UTC) Posts: 655 Location: Buenos Aires,		Hi Matt, I belive I've found the solution. 21MTC has four pins that should provide both voltage and info to the SUSI sound module. 16 - V+ 20 - GND 5 - clock 6 - data Will try that and see what happens. Regards, Jorge.
		Jorge Vilarrubí Buenos Aires ARGENTINA

1 user liked this useful post by jorge_vilarrubi		biedmatt
User Profile View All Posts by User View Thanks

jorge_vilarrubi		#6 Posted : 08 February 2015 12:41:50(UTC) Retweet
Joined: 15/12/2003(UTC) Posts: 655 Location: Buenos Aires,		Hi Matt et al, my solution has worked. CV124 must be set accordingly. Best regards, Jorge
		Jorge Vilarrubí Buenos Aires ARGENTINA

1 user liked this useful post by jorge_vilarrubi		biedmatt
User Profile View All Posts by User View Thanks

Users browsing this topic
Guest

Forum Jump

You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.