 Joined: 13/02/2008(UTC) Posts: 601 Location: Kirseberg
|
Hi all! It´s not easy having the time you need to plan the layout when you work alot and I´ve not finished moving Everything from my apartment. Today I´ve got some tima to spare and I´ve come up with a definitve version of the plan. I´ve also included all the Contact Points. It´s gonna be a Little bit complicated. There will be 3 coal trains (37970, 37973 and 37976) from the tracks closest the water and they are gonna run on the same tracks using the shuttle train function. Therefore I´m gonna use 2 7244 on Contact Points 11 and 7 and be activated by using the route function of the CS2 thereby fooling the S88. Pretty complicated but I Think it will work. I´ve got lots of problems using RocRail so I plan on only using the 60215. I also intend to build the framwork mostly in plywood as open framwork in 4 different modules for easier seperating them if I move. Also a new improvement are all the switches. The single track will be the one that connects to the rest of the layout. Now I "only" have to find a good way to use the Rolling mill, the Bonn station and the Faller military Buildings... and also find some good way to use all 4 Big Boys... and maybe some hidden shadowstations. Please come with suggestions and comments.   |
|
 2 users thanked klarinettmeister for this useful post.
|
|
|
|
 Joined: 23/08/2006(UTC) Posts: 2,064 Location: Beverly, MA
|
Hi all,
David,I would use good quality pine board or MDO for the module frames,pine will be a lot lighter if you move.MDO is very rugged and again fit and finish is very important.
Also have a system to plug each module wiring into the next easily.
Dr D
|
1 user thanked kbvrod for this useful post.
|
|
|
|
Joined: 13/02/2008(UTC) Posts: 601 Location: Kirseberg
|
Originally Posted by: kbvrod  Hi all,
David,I would use good quality pine board or MDO for the module frames,pine will be a lot lighter if you move.MDO is very rugged and again fit and finish is very important.
Also have a system to plug each module wiring into the next easily.
Dr D Thanks for the tip! The sheets of pine are quite expensive here and they are only 7,5 mm thick and there are also some pattern on them. I aim for 12 mm plywood. I´ve only been looking at 2 different stores. I can´t find MDO and haven´t heard of it Before. Maybe there´s a different name for it here in Sweden... Or maybe it´s not used very often. |
|
1 user thanked klarinettmeister for this useful post.
|
|
|
|
 Joined: 04/06/2009(UTC) Posts: 17,006 Location: Scotland
|
Hi David, "It's gonna be a little bit complicated". Sure is for me anyway.  I'd stick with plywood, if you want heavy weight go 18mm.  Ian.
|
1 user thanked Ian555 for this useful post.
|
|
|
|
Joined: 23/08/2006(UTC) Posts: 2,064 Location: Beverly, MA
|
Hi David all, all, >Thanks for the tip! The sheets of pine are quite expensive here and they are only 7,5 mm thick and there are also some pattern on them. I aim for 12 mm plywood. I´ve only been looking at 2 different stores.< I was thinking pine boards for the framework. When you said modules and maybe one day -might- move again the lighter weight is better.The ETE module group teaching me a lesson.  >I can´t find MDO and haven´t heard of it Before. Maybe there´s a different name for it here in Sweden... Or maybe it´s not used very often.< MDO is explained here: http://en.wikipedia.org/wiki/Medium_density_overlay_panelBig use in the US is road/highway signs and architectural uses on houses.The reason I used it on my old home layout was I couldn't find a true flat sheets of plywood! I need that for the large Bw I was building.MDO is perfectly flat,easy to cut,... Dr D
|
1 user thanked kbvrod for this useful post.
|
|
|
|
Forum Jump
You cannot post new topics in this forum.
You cannot reply to topics in this forum.
You cannot delete your posts in this forum.
You cannot edit your posts in this forum.
You cannot create polls in this forum.
You cannot vote in polls in this forum.
